KG 인포콘

Infoconn is an application for KG MOBILITY connected car service.

[Basic Information]

(1) Infocon

To use the Infoconn app, you must sign up at the bottom of the app's first screen or sign up on the Infoconn homepage (https://infoconn.kg-mobility.com).

When using it for the first time after logging in, you must go to the upper right menu of the app > Subscription vehicle information > Find service subscription vehicle > Mobile phone authentication > Vehicle registration to display Infocon subscription/activation vehicles.

(2) Other s

The following procedures are required to use the in-vehicle voice recognition function, home IoT service, and music service (limited to customers who subscribe to the service).

- Naver Clova : Service information > Additional services > Naver Clova :

- Music service : Service information > Additional services > Music

- Home IoT : Service information > Additional services > Smart home

(3) Select a vehicle to use the service

If you own more than one Infocon vehicle under the same name, you can swipe left or right on the vehicle shown on the first screen after logging in to select the vehicle you want to use the Infocon with.

[Features provided]

1. Vehicle remote control

1) Remote start/air conditioning service and remote air conditioning stop

- Using your mobile phone, you can start the vehicle in advance and preheat the engine before boarding, and during remote starting, you can turn off the engine via your mobile phone.

- With remote start, you can operate the air conditioner or heater, remove moisture from the windshield and rear

By controlling the glass heating, you can create a comfortable driving environment before boarding.

※ Precautions (including notes and warnings):

: Please be careful when using the vehicle as idling locations and idling times are regulated differently in each region according to local government ordinances.

: In the following cases, remote start and air conditioning control services do not start.

- Normal starting state (ignition switch ‘ACC’ and ‘ON’, engine idling and driving)

- When the gear position is not P (Park)

- If the vehicle door is not locked

- When the vehicle door, hood, or tailgate is open

- When a problem is detected with the vehicle power and steering system

: In the following situations, remote start (including air conditioning) will automatically turn off for the 's safety.

- If smart key authentication is not performed after opening the door (during normal smart key authentication)

Switches to normal startup.)

- Detection of abnormal vehicle doors, hoods, and tailgate openings

- Vehicle movement detected during remote start

- During remote starting, if the driver's presence is detected inside the vehicle, such as pressing the brake pedal, pressing the ignition switch, changing gear position (leaving gear position P), etc.

2) Remote horn/hazard light control

When you cannot the exact location of your car in a parking lot, you can use your mobile phone to check the location by honking and flashing the emergency lights. This function automatically stops after 30 seconds of operation, and can be stopped within 30 seconds through the app. do.

※ Precautions (including notes and warnings)

: Be sure to use the service while parked.

: Normal start state, not remote start (from smart key start and remote start to normal start)

switched state) and the service does not operate while driving.

3) Remote door opening/locking

- If you do not have a smart key, are unsure of the vehicle door open/locked status, or need to open the vehicle door for someone else from a remote location, unlock or lock the vehicle door using your mobile phone. You can.

※ Precautions (including notes and warnings)

: Be sure to use the service when parked in a safe place where there is no threat of theft.

: In the following cases, the remote door opening/locking service does not work.

- Normal ignition, not remote ignition (smart key ignition and remote ignition switched to regular ignition) and driving

- Burglar alarm in operation

:The remote door lock service does not work when the door is not completely closed or the hood or tailgate is open.

: When the smart door is set to auto close, after successful remote door opening (unlocking), the door can automatically return to the locked state within a certain time.

: When a remote door open (unlock) command is given in the safety unlock setting, only the driver's door is unlocked.

2. Check vehicle status

1) Find parking location

If you don't the exact location of your car in the parking lot, you can check the location of your car on the map on your phone.

※ Precautions (including notes and warnings)

: To protect personal information, it can only be used if the distance between the mobile phone and the vehicle is less than 1km.

: The location of the vehicle and your mobile phone are displayed together on the app map. Be sure to keep your phone's GPS (location information) function turned on.

: The accuracy of the vehicle's parking location may vary depending on GPS information.

In areas where GPS reception is shaded, such as indoor (underground) parking lots or high-rise building areas where it is difficult to receive GPS satellite signals, the displayed parking location may differ from the actual parking location.

: Depending on the vehicle environment and wireless communication environment, checking the parking location may take more than 30 seconds.

2) Check the condition of my car

You can check the open/closed/locked status of the vehicle's doors, the open/closed sunroof/tailgate/hood, the headlamp on/off, and the engine start on/off status through the app.

※ Precautions (including notes and warnings)

: Items available for status inquiry may vary depending on vehicle model and options, or may change without separate notice. If each status inquiry item is unconfirmed depending on the vehicle environment, it will be displayed as ‘unconfirmed’.

3) Vehicle diagnostic information

When the dashboard warning light turns on/flashes or the driver detects a problem with the vehicle, if you use the vehicle diagnosis service, we will guide you to receive vehicle maintenance at an appropriate time by analyzing the vehicle's fault code information.

※ Precautions (including notes and warnings)

: If you do not use the vehicle diagnosis service, the diagnostic information in the monthly vehicle report may differ from the actual vehicle condition.

: If diagnostic equipment is connected to the vehicle, vehicle diagnostic services may be limited.

Please remove the diagnostic equipment and start again.

3. Send destination

1) Send destination, recent destination, repeat schedule

Destination information searched on your mobile phone can be transmitted to the car navigation system anytime, anywhere. You can check the latest destination information, and through settings, destination information can be transmitted repeatedly. For navigation-related matters such as route settings, please refer to the AVN manual. .

4. Vehicle report

1) Monthly vehicle report

Once a month, we provide you with a report on vehicle operation information, vehicle malfunctions, and consumable replacement cycles. Operation information for the most recent month (previous month), vehicle malfunctions, consumable replacement cycles, etc. are provided on the 1st of every month.

2) Operation information

You can check the vehicle mileage, time, and fuel efficiency for all recent trips (1 month, 3 months, 6 months, 1 year).

3) Consumables management

Through the app, you can check the replacement history of each consumable in your vehicle. Separately from the app, AVN checks the exchange cycle and provides notification messages according to the replacement period.

5. My information

You can check your personal information and change your .

6. Subscription vehicle information

1) My vehicle

You can search for your vehicle that has subscribed to the Infocon service. (More than one may be displayed depending on whether infocon is used.)

[Information on permissions and purposes for using the Infocon app]

Required permissions

-Phone: Permission to check logged-in device information (UUID) to use the app safely

- Location: Confirm parking location/confirm location when transmitting destination

- Storage space: web content

- Address book: Check recipient name when sending SMS from vehicle (linked with AVN messaging app)

- Bluetooth: Send SMS sent from the vehicle to the smartphone or send SMS from the smartphone to the vehicle